美女裸体无遮挡永久免费网站-а√天堂资源官网在线资源-国产亚洲精品精华液-免费视频爱爱太爽了

Main disadvantages of side horizontal cold heading machine

Current location:Home  / News  / Day health information / Main disadvantages of side horizontal cold heading machine

Main disadvantages of side horizontal cold heading machine

date:[2022-09-17]     pk_hits:

The die arrangement of cold heading forming machine has two forms: one is vertical arrangement, and the overall structure of the machine tool is horizontal; One is horizontal arrangement, and the overall structure of the machine tool is horizontal. The side horizontal multi station cold heading machine is easy to operate and adjust. Workers can operate standing without bending, and can sit and observe the operation of the machine tool. It is more comfortable - the design concept of the side horizontal cold heading machine seems to focus on this advantage. Compared with its series of disadvantages, this advantage is insignificant.


五模五沖TW24B多工位冷鐓機


The main disadvantages of the side horizontal cold heading machine are:

1. The bed structure is asymmetric from top to bottom, left to right, which causes complex elastic deformation and poor overall rigidity.

2. The axial component of the upsetting resistance of each station is distributed on the vertical plane, and its resultant force deviates from the center line of the machine tool, that is, from the center of the connecting rod pin, producing a huge torque on the slider. This torque almost all acts on the slider guide rail, producing a great destructive force on the guide rail. How destructive is it? For example, for a cold upsetting machine with a nominal pressure of 1200 kN, the resultant force of the upsetting resistance can offset the centerline of the machine tool by up to 5 cm (when there is a station without a workpiece, the offset may be greater), and the torque acting on the guide rail is equal to 60 kN · m. If the length of the slider is 1.5 meters, this moment is equivalent to pressing a 4 ton weight on one end of the slider and lifting it with a force of 40 kN (equivalent to 4 tons) on the other end. It goes without saying that the slider and guide rail will have severe uneven wear, and the accuracy of the machine tool can be imagined.

3. Due to structural reasons, the slider guide must be raised, which further aggravates the friction between the slider and the guide.

4. In order to improve the friction conditions between the sliding block and the guide rail, the designer has to lengthen the sliding block, which increases the weight of the sliding block in vain, leading to the reduction of the stability of the whole machine.

5. The ejection mechanism cannot be unfolded on the same plane (longitudinal vertical plane) as the main transmission mechanism, which cannot achieve a compact design. As a result, the structure is complex and huge.

6. The clamp transmission mechanism has the same disadvantage; The complex structure of the clamp box is not commensurate with the uncomplicated functions it realizes.

7. When the workpiece gripped by the clamp is rotated and lowered, the workpiece is easily shaken and thrown off due to the influence of its own weight, especially the longer workpiece.

8. When the clamp (or scissors) of the upper station drops, the workpiece will fall down and may be pressed on the lower station to break the mold and clamp.

9. The height is too large, which blocks the workers' sight and worsens the working environment of the workshop.

10. It is difficult to assemble and disassemble the mold and lift it. From the middle and late 1960s to the 1970s and 1980s, and even the early 1990s, side horizontal cold heading machines became popular in China and gradually formed a series. However, due to the above "top ten crimes", the lateral horizontal cold heading machine finally cannot escape the fate of being eliminated.


Pingyang Tianwei Machinery Co., LtdFull system solutions for quality machinery manufacturers

All product pictures and publicity pictures of this website belong to us. No individual or organization is allowed to use them, and any embezzlement must be prosecuted.

Pingyang Tianwei Machinery Co., Ltd

Tel:0577-86266681Tel:0577-86125986mobile phone:13806699071E-mail:tianweimachine@126.comAdd: Haixi Industrial Park, Pingyang County, Wenzhou, Zhejiang

WeChat

Service hotline

13806699071

We warmly welcome your consultation, and we will provide you with satisfactory mechanical solutions

主站蜘蛛池模板: 亚洲av无码国产剧情| 中文字幕无码无码专区| 香蕉久久夜色精品升级完成| 亚洲国产午夜精品理论片妓女| 十三以下岁女子毛片| 饭桌上故意张开腿让公h视频 | 日本少妇寂寞少妇aaa| 日韩一区二区三区精品| 色综合av综合无码综合网站| 中文人妻熟妇乱又伦精品| 又爽又黄又无遮挡网站动态图| 国产精品主播一区二区三区| 国产jizz中国jizz免费看| 免费人成无码大片在线观看 | 国产激情精品一区二区三区| 乱人伦中文无码视频| 成人免费看片又大又黄| 色翁荡熄又大又硬又粗又视频| 国内精品视频一区二区三区| 国产精品国产三级国产a| 少妇内射视频播放舔大片| 亚洲日韩国产精品乱-久| 亚洲乱码精品久久久久..| 内射一区二区精品视频在线观看| ā片在线观看免费观看| 天天噜日日噜狠狠噜免费| 日本一区午夜艳熟免费| 人妻少妇被猛烈进入中文字幕| 天堂资源中文网| 好吊视频一区二区三区| 边喂奶边中出的人妻| 国产性夜夜春夜夜爽1a片| 寂寞骚妇被后入式爆草抓爆| 特级做a爰片毛片免费看108| 99久久国产精品热88人妻| 精品无码一区二区三区在线| 国产精品 自在自线| 国产青榴视频在线观看| 丰满少妇作爱视频免费观看| 在线精品亚洲一区二区动态图| 亚洲av综合av一区二区三区|